PET filament for the Bambu Lab X1 Carbon (X1C)
Back to the Bambu Lab X1 Carbon (X1C) filament guide. Status columns come from Bambu's material table (category-level, not brand-tested).
| Product | Brand | Category | Printer status | AMS status | Nozzle °C | Spool fit |
|---|---|---|---|---|---|---|
| Bambu Lab PET-CF | Bambu Lab | PET-CF/GF | Recommended | Not Compatible | 260–290 | unknown (no spool dimensions in source data) |
| ELEGOO PET-CF | ELEGOO | PET-CF/GF | Recommended | Not Compatible | 260–290 | unknown (no spool dimensions in source data) |
| Polymaker PET CF | Polymaker | PET-CF/GF | Recommended | Not Compatible | 220–250 | unknown (no spool dimensions in source data) |
| QIDI Tech PET-CF | QIDI Tech | PET-CF/GF | Recommended | Not Compatible | 280–320 | unknown (no spool dimensions in source data) |
| QIDI Tech PET-GF | QIDI Tech | PET-CF/GF | Recommended | Not Compatible | 260–320 | unknown (no spool dimensions in source data) |
| Siraya Tech Fibreheart PET-CF | Siraya Tech | PET-CF/GF | Recommended | Not Compatible | 280–320 | unknown (no spool dimensions in source data) |
| Siraya Tech Fibreheart PET-GF | Siraya Tech | PET-CF/GF | Recommended | Not Compatible | 300–320 | unknown (no spool dimensions in source data) |
| Spectrum PET CF15 | Spectrum | PET-CF/GF | Recommended | Not Compatible | 245–270 | unknown (no spool dimensions in source data) |
| Tectonic 3D PET CF | Tectonic 3D | PET-CF/GF | Recommended | Not Compatible | 220–250 | unknown (no spool dimensions in source data) |
| TINMORRY PET GF | TINMORRY | PET-CF/GF | Recommended | Not Compatible | 220–250 | unknown (no spool dimensions in source data) |
| TINMORRY Matte PET CF | TINMORRY | PET-CF/GF | Recommended | Not Compatible | 220–250 | unknown (no spool dimensions in source data) |
PET on the Bambu Lab X1 Carbon (X1C): sort by heat resistance (datasheet values only)
Only the 1 of 11 products with values copied from a manufacturer datasheet are listed. Test methods differ between brands; see each product page for the method and caveats. Click a column heading to sort.
| Product | Brand | HDT method | Source | ||||
|---|---|---|---|---|---|---|---|
| Bambu Lab PET-CF | Bambu Lab | 205 | 182 | 75 | 226 | ISO 75 | TDS |
Browse Elegoo filament (affiliate link)
Affiliate disclosure: this is an affiliate link. If you buy through it we may earn a commission at no extra cost to you. It doesn't change which data we show. The link goes to Elegoo's own store, not to a specific product listed on this page.